I just received the new plate mount from Jeff this morning, and it is very
impressive. You have to hold it in your hands to really appreciate its
lightness compared to the original  adapter plate.

Add in the fact that it is also the engine mount, and will accept whatever
starter you have, wow! If you are going with a TC PSRU, this is the way to
go. Truly amazing.



Craig Smith


See the add for these on the front page near the bottom.
http://www.rotaryeng.net

Paul Lamar



Those "cups", are they replacements for the stock engine mounts?

Yes. Most people don't use the stock mounts. They are very heavy
and the 900 foot pound torque from the 3 rotor prop must be reacted by
the mounts so putting them on the PSRU adapter plate mount is the best place.

We use the low cost (under $10) Barry Controls 2200 series industrial rubber
bushings. This is the same mount used in the TIO 550 Questair Venture.
Lycoming rubber bushings are $100 each.

Paul Lamar