I just received the new plate mount from Jeff this morning, and it is
very
impressive. You have to hold it in your hands to really appreciate its
lightness compared to the original adapter plate.

Add in the fact that it is also the engine mount, and will accept
whatever
starter you have, wow! If you are going with a TC PSRU, this is the
way to
go. Truly amazing.



Craig Smith


See the add for these on the front page near the bottom.
http://www.rotaryeng.net

Paul Lamar



Those "cups", are they replacements for the stock engine mounts?

Yes. Most people don't use the stock mounts. They are very heavy
and the 900 foot pound torque from the 3 rotor prop must be reacted by
the mounts so putting them on the PSRU adapter plate mount is the best
place.

We use the low cost (under $10) Barry Controls 2200 series industrial
rubber
bushings. This is the same mount used in the TIO 550 Questair Venture.
Lycoming rubber bushings are $100 each.

Paul Lamar


How much does it weight compared to Tracy's stock plate?

Brian Trubee

I don't know exactly but I think it is a couple of pounds lighter.

Jeff have you weighed the plate?

Paul Lamar


Paul
Tracy's plate weighs a little over 8 pounds, mine weighs about 5 1/2 lbs.
Don't forget my plate has a larger frontal surface area.
If Tracy's were the same over all size it would weigh at least 10 lbs
maybe more.

jeff


JEFF I WOULD LIKE TO KNOW HOW MUCH FOR 2 DODDRIDGEPLATE/MOUNT

THAK,S

Jean Prudhomme
                       
Price is on the web site. Scroll down to the bottom of the
front page.


Paul Lamar