I finally got my Alpine running with the rotary engine that was in the
BD-4 before I wrecked it. Movie produced and distributed via Youtube.
http://www.youtube.com/watch?v=FwceNc2ydN8
Once I got all the electrical connections correct, it fired right up.
I am using Tracy's EC2 and EM2. I had the large display on the EM2, an
it wouldn't fit but the smaller display was a direct replacement. I
just had to move the wires from one to the other. I'm really
interested in finding out how well the EC2 will work in the auto
application. My speedometer is GPS based for now.
The exhaust is a header with 2 to 1 collector that ends just
under the passenger seat. Next stop is the muffler shop!
I was expecting more smoke on first start since I had pickled the
engine with oil a year and a half ago. I used the two stroke oil, so
that may have reduced smoke output some.
Bob W.
Cool Bob. Everybody sign in and rate this 5 stars.
Even tho there was something wrong with the engine :)
A rotary should start on the first turn :)
Oil smoke is typical for an engine that sits around for months.
Paul Lamar
Thanks Paul, and it would have if I had checked the CAS connector more
closely. I was using a 3 pins of a 4 pin connector but started on one
end on one connector, and the other end on the mating connector. :)
Bob W.