Paul
I noticed you have installed the PP plates with bolts from the outside.
May I make a suggestion that you use studs? Use big washers and nuts and
then torque the plates down until the RTV sets up overnight. After
that you will have a nice mounting platform for the manifold, and
throttle combination. Seal the inner threads when the studs are
installed of course or water will spiral up and out. I noticed you saw
the wisdom of O-rings over smeared RTV. Sure hard to beat O-rings for
sealing but then Mazda discovered this years ago:)
Doug in Japan
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.