Subject: this may be what we are looking for
From: Rotary Engine
Date: 11/4/2009, 12:03 PM
To: AAA Put this in the To box <rotaryeng@earthlink.net>, Freescale Support <support@freescale.com>



http://www.sae.org/mags/AEI/6906

http://www.freescale.com/webapp/sps/site/application.jsp?code=APLSMALLENGCTRL&tid=vansmallengine
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KIT33812ECUEVME
http://www.freescale.com/support

C. Smith

I'll second that. In the true spirit of the 555 one computer per injector.
If we can get this to work it will be off the shelf ignition and EFI at very low cost indeed.  Modular and redundant for safety.

For a two rotor, four FreeScale demo PC boards would be required as each one has an injector driver. Two triggers are no problem for us as each rotor fires once per rev. Just like a one cylinder two cycle piston engine.

Hopefully there is a one cylinder 2 cycle piston engine FreeScale software example that we can use to get a fast start.

I downloaded a bunch of stuff and got this version of the code warrier up and running. Do we have any C programmers on here?

FreeScale makes you jump through a lot of hoops as far as registering and activation which is a real pain in the ass. I called them and tried to explain I don't run windows on the Internet for virus reasons so on-line activation does not work for me.

Thanks Craig for letting me know about this.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.