http://www.sae.org/mags/AEI/6906
http://www.freescale.com/webapp/sps/site/application.jsp?code=APLSMALLENGCTRL&tid=vansmallengine
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KIT33812ECUEVME
http://www.freescale.com/support
C. Smith
I'll second that. In the true spirit of the 555 one computer per injector.
If we can get this to work it will be off the shelf ignition and EFI at
very low cost indeed. Modular and redundant for safety.
For a two rotor, four FreeScale demo PC boards would be required as each
one has an injector driver. Two triggers are no problem for us as each
rotor fires once per rev. Just like a one cylinder two cycle piston
engine.
Hopefully there is a one cylinder 2 cycle piston engine FreeScale
software example that we can use to get a fast start.
I downloaded a bunch of stuff and got this version of the code warrier up
and running. Do we have any C programmers on here?
FreeScale makes you jump through a lot of hoops as far as registering and
activation which is a real pain in the ass. I called them and tried to
explain I don't run windows on the Internet for virus reasons so on-line
activation does not work for me.
Thanks Craig for letting me know about this.
Paul Lamar
Instead of re-inventing the wheel, one could modify/enhance what has
already been validated on thousands of applications:
http://www.bgsoflex.com/megasquirt.html
http://diyautotune.com/
Can't beat open source EFI for ~$300...
Or pay someone who has already designed the system to suit it's application
to aircraft:
http://www.maxwellpropulsion.com/
As seen at Oshkosh 2009
One unique device that I'm not aware exists outside of Maxwells proprietary
design is an open source integration board to allow use of parallel,
redundant Megasquirt controllers.
Ideally such a system would approach the robustness of Mistrals solution:
http://www.mistral-engines.com/Technology/DEM
Cheers,
Zach Knutson
We are talking much much cheaper than the megasquirt. Also the megasquirt does not
integrate ignition for the rotary. This system does both ign and EFI and it is far far
cheaper than 4 megasquirts. You must do a lot of stuff to get the megasquirt to work on
a rotary.
Mistral is proprietary so you don't have any control over the software. They do not
provide a source listing of the software. Not to mention the cost.
The same thing can be said about Maxwell Propulsion Systems and it does not support the
rotary. It is like total control by somebody else verses totally unlimited personal
freedom. Windows verses Linux :) If a problem arises it can be shared and fixed by everyone.
We are looking for a very simple, low cost system that anybody can trouble shoot and
repair with open software. These FreeScale systems are complete single cylinder ign and
EFI on one small PC board. The rotary is the equivalent a two cylinder 2 cycle engine
so these FreeScale systems are ideal.
Here is some more stuff on them.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.