Subject: this may be what we are looking for
From: Rotary Engine
Date: 11/4/2009, 2:12 PM
To: AAA Put this in the To box

 http://www.sae.org/mags/AEI/6906

http://www.freescale.com/webapp/sps/site/application.jsp?code=APLSMALLENGCTRL&tid=vansmallengine
 http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KIT33812ECUEVME
 http://www.freescale.com/support

 C. Smith

 I'll second that. In the true spirit of the 555 one computer per injector.
 If we can get this to work it will be off the shelf ignition and EFI at
 very low cost indeed. Modular and redundant for safety.

 For a two rotor, four FreeScale demo PC boards would be required as each
 one has an injector driver. Two triggers are no problem for us as each
 rotor fires once per rev. Just like a one cylinder two cycle piston
 engine.

 Hopefully there is a one cylinder 2 cycle piston engine FreeScale
 software example that we can use to get a fast start.

 I downloaded a bunch of stuff and got this version of the code warrier up
 and running. Do we have any C programmers on here?

 FreeScale makes you jump through a lot of hoops as far as registering and
 activation which is a real pain in the ass. I called them and tried to
 explain I don't run windows on the Internet for virus reasons so on-line
 activation does not work for me.



 Thanks Craig for letting me know about this.


 Paul Lamar



 Instead of re-inventing the wheel, one could modify/enhance what has
 already been validated on thousands of applications:
 http://www.bgsoflex.com/megasquirt.html
 http://diyautotune.com/
 Can't beat open source EFI for ~$300...



 Or pay someone who has already designed the system to suit it's
 application to aircraft:

 http://www.maxwellpropulsion.com/
 As seen at Oshkosh 2009

 One unique device that I'm not aware exists outside of Maxwells
 proprietary
 design is an open source integration board to allow use of parallel,
 redundant Megasquirt controllers.
 Ideally such a system would approach the robustness of Mistrals solution:
 http://www.mistral-engines.com/Technology/DEM



 Cheers,
 Zach Knutson



 We are talking much much cheaper than the megasquirt. Also the megasquirt
 does not integrate ignition for the rotary. This system does both ign and
 EFI and it is far far cheaper than 4 megasquirts. You must do a lot of
 stuff to get the megasquirt to work on a rotary.



 Mistral is proprietary so you don't have any control over the software.
 They do not provide a source listing of the software. Not to mention the
 cost.



 The same thing can be said about Maxwell Propulsion Systems and it does
 not support the rotary. It is like total control by somebody else verses
 totally unlimited personal freedom. Windows verses Linux :) If a problem
 arises it can be shared and fixed by everyone.



 We are looking for a very simple, low cost system that anybody can
 trouble shoot and repair with open software. These FreeScale systems are
 complete single cylinder ign and EFI on one small PC board. The rotary is
 the equivalent a two cylinder 2 cycle engine so these FreeScale systems
 are ideal.



 Here is some more stuff on them.



 Paul Lamar



Paul,
The support for rotary engines (specifically ignition) is an issue of the
past:
http://www.diyautotune.com/tech_articles/how_to_megasquirt_your_mazda_fc_rx7.htm
I'm not sure why you would need 4 controllers though, even with split
ignition timing and 4 coils...

If you haven't investigated the developments in MS hardware and software I
would encourage it. They are much more robust and powerful than even 2
years ago.

You'll get no argument on the open source debate from me, which is why
Meagsquirt is so appealing, the designs and features are always evolving.

Cheers,
Zach Knutson

What the heck kind of email program are you using? It double spaces everything. That is a real pain in the ass. Try setting it up to output plain text only.

The Megasquirt was designed for a four four cylinder four cycle engine.

The two rotor is more like a two cylinder 2 cycle engine with dual ignition. Yes the megasquirt can be made to work but you need two minimum and it is not simple to adapt it to the rotary.

Here is a diagram of just how simple this system can be.

For a three rotor you just add another CAS spaced 120 degrees and a couple more boards.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.