http://www.sae.org/mags/AEI/6906
http://www.freescale.com/webapp/sps/site/application.jsp?code=APLSMALLENGCTRL&tid=vansmallengine
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KIT33812ECUEVME
http://www.freescale.com/support
C. Smith
I'll second that. In the true spirit of the 555 one computer per
injector.
If we can get this to work it will be off the shelf ignition and EFI
at very low cost indeed. Modular and redundant for safety.
For a two rotor, four FreeScale demo PC boards would be required as
each one has an injector driver. Two triggers are no problem for us
as each rotor fires once per rev. Just like a one cylinder two cycle
piston engine.
Hopefully there is a one cylinder 2 cycle piston engine FreeScale
software example that we can use to get a fast start.
I downloaded a bunch of stuff and got this version of the code
warrier up and running. Do we have any C programmers on here?
FreeScale makes you jump through a lot of hoops as far as
registering and activation which is a real pain in the ass. I called
them and tried to explain I don't run windows on the Internet for
virus reasons so on-line activation does not work for me.
Thanks Craig for letting me know about this.
Paul Lamar
Robin's Mac OS disk should have X Code on it, provided it's not too
old. You can program C, C++ , and a variety of others with it.
I just loaded mine for a college course in C++.
Chris Cosman
This is a good project for you Chris.
Paul Lamar
It would be a great project for me. However, if you folks were
expecting any timely results, I may let you down...
Let me get through my class first and see what I know...
Chris C.
OK Chris. C is pretty dry and this should add some incentive.
Plus you could ask the instructor questions. Code Warrior comes with a C compiler.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.