Paul,
In reviewing several of my rotary engine pictures I see there are several
installations that pressurize their water systems. Can you tell me the
benefits or shortcomings of that? (Three pictures attached, see yellow arrows)
Thanks,
Sandy McNabb
Renesis in a Glass Goose
It is a good pre flight check. You need a pressure gage to go along with it.
Pump it up to 50 psi and watch the gage. If it holds pressure you have no leaks.
Increased pressure delays boiling which is the Achilles heel of liquid cooling systems.
Here is an illustration from my book How to Cool Your Wankel
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.