Paul,
Click on the link below and watch the high speed video of
combustion in a diesel engine. Wouldn't it be interesting to
repeat this for a rotary.
George
http://www.photron.com/content.cfm?n=gallery
http://tinyurl.com/nkm5a3
http://preview.tinyurl.com/nkm5a3
It sure would. All we need now is a glass rotary engine.
Paul Lamar
There has been video of piston engine flame front (not explosion),
that used a quartz piston. The spark could be seen and the flame
front propegating from it. Then they showed detonation. WOW. You can
then see why it is so destructive. For a Wankel, a hole could be
drilled in and a tube welded like a pport but smaller, that would
fit the camera. A locking system to hold the sensor in place would
be required. A fisheye lens on the chamber end that was just below
the housing ID should show the combustion. Close to the lead plug
would likely be the place to install the camera.
Dale Davies
--
Have you people seen the Youtube video; In cylinder video. It shows slow
motion of a full cycle.
Dale Davies
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.