Subject: Geo metro alternator [was exhaust Inserts
From: Rotary Engine
Date: 11/8/2009, 6:38 AM
To: AAA Put this in the To box


 Hi Mark;

 Was it you that was using an externally regulated Geo Metro alternator?
 How is it working out?
 Do you have any of the specifics 60A?  weight?

 Thanks
 Cary

Cary,

Yes, I'm running dual Geo Metro alternators, converted to external
regulators.  They're working great and provide plenty of amps.  I've split
the loads so they both have something to do.  They weigh about 5.5 lbs/ea.,
about half of the stock Mazda alternator.  I did slow them down with larger
pulleys though.  I'm also running dual batteries and have a crossover
switch
in case either alternator fails.  The charging system is wired per Bob
Knuckols fig. 12.

Thanks,
Mark


Mark,

What is the amperage? I am interested in also doing two batteries with a
cross over switch.
Where to find Bob Knuckols fig. 12?

Doug in Japan


Doug,

Bob runs the Aeroelectric Connection at
http://www.matronics.com/aeroelectric/  You're looking for Appendix Z
located here, http://www.aeroelectric.com/R12A/AppZ_12A4.pdf.  Figures are
toward the end.  He has published an excellent book on a/c wiring which can
be a very handy reference.

Geo alternators are rated at 55 amps, plenty for most a/c.

Mark


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.