I'm fairly sure I'm going to eventually go with a simple mechanical carb with manual
leaning (as we discussed a while back). If so, what's the likely penalty
(HP/weight/fuel consumption) for using the built-in throttle on the carb rather than
going with the more efficient slide throttle for a NA 13b P-Port setup?
Thanks
Mark W.
I don't know Mark but my guess is not much. The big problem with a 13B p-port and carb
is idling stability. You need the throttle close to the rotor housing. With an RX8 side
exhaust it would be just as stable as a side intake 13B.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.