Paul,
 You mentioned previously that you would not make a slide throttle kit for
 the 20B but you could supply some of the raw materials for us to make our
 own.  What parts do you have (ie.tubes, plate material, etc) that we can
 use
 and what are the costs?  I found a 20B slide  throttle drawing on your
 website and was going to start searching for  someone who can do the
 fabrication
 for me, but I thought it might be better to  start with any parts that
 you've already got rather that trying to start from  scratch.

 Don

 The only thing I have is the fuel injector blocks and the bell mouth.
 Bob Darrah may have built some parts for Mark Steitle. Bob is building a 3
 rotor Sea Wind and Mark is installing a p-port 3 rotor in his Lancair ES.
 Both are in Austin.

 Paul Lamar

 Paul,
 You also supplied me with the inlet/outlet tubes.  BTW, I still need tube
 #6
 (You may remember that it wouldn't fit in the box).  I may have enough
 teflon left over to make one more 3-rotor slide throttle, but can't be
 sure
 until I see if I screw up the first one.  ;-)  Aluminum is easy to come
 by.

 Mark S.

 Yes I forget about those. I have a few left at $20 each. Cash.
 Picture on the web site. Send the money to:

 830 East Santa Maria St.
 Suite 303
 Santa Paula CA
 93060

 This is not a shipping address. Mail only.

 BTW one could get two slide throttle kits and kludge them into a 3 rotor
 version with a bit of tig welding. I think but I am not sure :)

 Paul Lamar

 Paul,
 I paid for the tubes when placing the order for the tubes and injector
 blocks weeks ago.  They all wouldn't fit in the box, so you said you would
 ship the 6th tube later.  I'll send another $5 if you need, but I really
 don't need another set of inlet/outlet tubes.  I'm just short one tube.

 Mark S.


 I forgot Mark. No need for the $5. I'll mail you the other tube tommorrow.
 Give me your address again.

 Paul



 Paul,
Do you have any of the vacuum port adapters left?  If so, I'll send money
for those and you can include the slide throttle tube with the shipment.

Mark S.

Not right at the moment but we do plan on making more soon.
Don't send money. Wait till I am ready to ship.

Paul Lamar


OK, will do.

Mark S.