Hello,
I have an amateur built wooden three seater CP605 "super Diamant" designed to be powered
by a lycoming O-360... and no motor
yet.
A typically french regulation for amateur built airplanes, impose that engines above 200
HP to be from aeronautic origin, and
maintained on the same basis than industrially built airplane engines.
In other words, the engine can be of any origin (car engine for instance) and maintained
freely by the owner as far as it
does not exceed 200 HP.
The rotary is an interesting solution indeed, but here in France, threre are very few
mazda RX, and it is almost impossible
to find a rotary engine to transform to air use.
In the US, on the other hand, it should be quite easy to find a mazda rotary, and US
sites on internet seem to propose lots
of interesting parts, but I found rather difficult to define the budget needed to
purchase the whole lot of what is needed to
replace a O-360 by a rorary based air adaptation.
Could you give me an estimated budjet for a 180-200 HP solution (in US$ , I will add
change in Euros and custom charges)
Thanks
Philippe-Pierre DEJEAN
philippe-pierre.dejean@edf.fr
My guess is $8000 US for an over haulded RX7 engine or a used RX8 engine and a Tracy
Crook's gear box and EFI system.
Try Switzerland or Germany. When I am in Europe I frequently see RX7 in those countries.
Also in the UK.
http://www.der-wankelmotor.de/
http://www.mazdarotaryclub.com/
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.