Subject: Mechanical/electric fuel injection sort of
From: Rotary Engine
Date: 11/26/2009, 7:22 PM
To: AAA Put this in the To box

I had a talk with a Sprint car mechanic recently and mechanical fuel
injection is widely used in 800 HP Sprint car engines. Kinsler is a major
supplier of parts. What I am thinking of doing is use a pulse width
controlled electric fuel pump instead of the engine driven Kinsler fuel
pump.
My friend tells me there is a thing called a "pill" that bypasses the fuel
back to the tank. The size of the hole in the "pill" controls the max
pressure the fuel rail sees.

What happens with fixed orifice injectors is the fuel pressure goes up as
the volume of fuel going through the injectors increases. Sprint car drivers
are not allowed to change the "pill" while driving but a needle valve on the
instrument panel could serve the same purpose. This is a super simple fuel
injection system and super low cost as one needs a fuel pump in any event.
The 555 circuit I have will work as is to control the pump speed based   on
either manifold pressure sensor output  or mass air flow sensor output.

I just checked an electric  pump I had to verify the housing of the pump was
electrically isolated from the negative side of the motor connector. This is
a long story  as the PWM circuit switches the low side of the load just like
a fuel injector. One of those little details one must worry about.

The first option is the cheapest as the sensors cost about $10 while the
second can cost up to $100. The manifold pressure sensors are linear while
the mass air flow sensors seem to put out a square law voltage with air
flow.
I am not sure about that statement as I have not extensively tested one yet.

That I can do by sticking it out the window of a moving car and recording
the voltage out as a function of car speed.

The first configuration tested will be the pressure sensor as a low cost
hand vacuum pump can be used to simulate the manifold pressure over a wide
range.

BTW I suggest everybody install Quick Basic on their windows computer as I
will be using it a lot in the future to calculate various and assorted
things as it works well for doing this. Easy to learn but if your ISP will
not pass a zip file, that I can send you, then you will have to send me $5
for a DVD.
Included in these attachments is a picture of a QB program to calculate the
fuel flow through an orifice. You can just type it in by looking at the
picture.

A spread sheet will also work but I am not as quick using them as I am QB.

Paul Lamar

Paul, in the mid "80s I was working for an infra-red instrumentation house.
A great deal of our products were purely analog, (even the first fire
control "computers" were all analog systems, like the Mk II GFCS in
Missourri class battle ships). I recall, just after a couple of our
engineers left to form their own company, they came by with a schematic they
wanted analyzed (as they were degreed engineers, and I was just a tech, I
still wonder why they were asking me). What I figured out was that it was an
analog computer, with electrically variable terms, not just a scaling
amplifier. It took a lot of digging through application notes and reference
books, but I still believe that just about anything can be done with analog,
given a need and motivation. Fire control is not a linear equation.
C. Smith



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.