Subject: Coils and spark plug wires
From: Rotary Engine
Date: 11/27/2009, 7:12 AM
To: AAA Put this in the To box


Paul,

Am I safe in assuming that the stock Mazda coils are all the same?

And, likewise true for the spark plug wires?

Thanks,

Sandy McNabb
Renesis in a Glass Goose

Coils are coils for the most part but some coils have different turns ratios for higher voltage sparks. I can't say which is which but MSD and others sell higher voltage coils. A lot depends on the ignition system used. Coils used to be on most of the time and the points turned them off to generate the spark. Newer systems use transistors that may not switch the same speed as points. CD systems use pretty much the same coil but it is used differently as a pulse transformer.
A narrow high voltage pulse somewhere in the neighborhood of 300 to 400 volts is used to shock the coil into action and output a spark.

I would not say that for spark plug wires. Some use radio noise suppression carbon cores or some such. Aircraft spark plug wires are shielded. I don't think they use carbon cores but I could be wrong. I think Klause uses solid copper core wires but he has added a braided steel shield for radio noise suppression. I would try  TV coax cable or some such for spark plug wires but I don't guarantee the results as the insulation may not be up to the job.  Great Plains aircraft sells steel shields for automotive spark plugs used on VW engines.
Contact them. http://www.greatplainsas.com/ Tell Steve Paul Lamar sent you :)

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.