Paul,
Am I safe in assuming that the stock Mazda coils are all the same?
And, likewise true for the spark plug wires?
Thanks,
Sandy McNabb
Renesis in a Glass Goose
Coils are coils for the most part but some coils have different turns
ratios for
higher voltage sparks. I can't say which is which but MSD and others sell
higher
voltage coils. A lot depends on the ignition system used. Coils used to be
on
most of the time and the points turned them off to generate the spark.
Newer
systems use transistors that may not switch the same speed as points. CD
systems
use pretty much the same coil but it is used differently as a pulse
transformer.
A narrow high voltage pulse somewhere in the neighborhood of 300 to 400
volts is
used to shock the coil into action and output a spark.
I would not say that for spark plug wires. Some use radio noise
suppression
carbon cores or some such. Aircraft spark plug wires are shielded. I don't
think
they use carbon cores but I could be wrong. I think Klause uses solid
copper
core wires but he has added a braided steel shield for radio noise
suppression.
I would try TV coax cable or some such for spark plug wires but I don't
guarantee the results as the insulation may not be up to the job. Great
Plains
aircraft sells steel shields for automotive spark plugs used on VW
engines.
Contact them.
http://www.greatplainsas.com/ Tell Steve Paul Lamar sent you
:)
Paul Lamar
Paul,
RG59 dielectric is only rated for 2300V maximum before breaking down. Last
thing I'd use for spark plug wire!
To reduce RFI either resistor plugs with solid copper spark plug wire, or
magnetic suppression wires with non-resistor plugs.
As to coils, most electronic systems have built in current limiting so you
do not saturate the core. Faster cycle times.
Old point style coils had either internal or external resistors for current
limiting.
Tom W
What about Teflon insulated coax? Would you have to go up to type "N"?
Speaking of ballast resistors the 2nd gen RX7 failed when used in aircraft
use so the power rating of the resistor had to be increased. It was an
electronic type with a crank angle sensor.
Paul Lamar
------------------------------------------------------------
Paul,
I didn't ask my question about the coils and spark plug wires very well.
I've mixed up my original Mazda coils and the spark plug wires, so I need to
know if the coils and wires are specific to the lead and trail positions, or
are they all the same?
Thanks,
Sandy McNabb
They are all the same except for length which is not critical.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.