Subject: Cooling System Electric Booster Pump
From: Rotary Engine
Date: 11/28/2009, 9:01 AM
To: AAA Put this in the To box

In a message dated 11/28/2009 8:04:13 A.M. Central Standard Time,
rotaryeng@earthlink.net writes:

Sorry,  not sure what happened to that link, but here it is  again:

_http://www.daviescraig.com.au/Electric_Water_Pumps-EWP115__12V___ELECTRIC_W
ATER_PUMP___PART_No__8025-details.aspx_
(http://www.daviescraig.com.au/Electric_Water_Pumps-EWP115__12V___ELECTRIC_W
ATER_PUMP___PART_No__8025-details.as
px)

Don

Don,

Long  links do not come across in email most of the time. There are several

reasons for this. Perhaps one is you may have sent it using html instead
of
plain text. There is an old saying in the computer world. Something to  the
effect of; "if you want it to work for the most number of people, you  must
use
the least common denominator." That would be plain text.   Each different
O.S.
and email program deal with email things differently.  Windows, Linux, Mac,
etc.,etc.. In fact it is worse than that as each  person can set up their
email
programs in different ways. Word wrap with a  different character
positions,
different margin settings, different  character sizes, different fonts,
etc.,
etc., etc., The situation rapidly  turns into a computer nightmare.

There is no real reason to use html as  a word is a word. The downside to
using
it as is there is a vast amount of  knowledge out in the world in plain
text and
plain text is the most  compact form of communication that takes up the
least
amount of storage  room on computers. Computers can deal with it in the
least
amount of time.  Some computers use hardware to deal with plain text rather
than
having the  main processor plotting each pixel on the screen one pixel at a
time.
The  character hardware is ten times faster than plotting each character
one
pixel at a time.  Another way of looking at it... is to consider html  in
email
it blootware.

Now here is the up side. If you are looking  at web site, or you are trying
to
understand a complex subject, links and  pictures can be embedded in the
html
text to take you off in a different  direction to understand a concept that
you
may not be familiar with. That  was why it was invented. IMHO it is the
only way
to go for web  sites.


Here is the solution to long links in plain  text.

http://tinyurl.com/create.php

Paul Lamar



To the best of my knowledge, I've never had that problem before.
Oh well, I thought it was a great topic, and as I researched it, I found
that a lot of car manufacturers like BMW and Audi use electric booster pumps
in  their cooling system.  That makes me feel better about attempting it.
I was just looking for some specific plumbing recommendations.

Don

This message is a good example of how different email programs and O.S.'s can screw up a message.

Electric water pumps work great in cars as 99% of the time the car engine is generating less than 40 HP. Here are some numbers. A car frontal area is about 25 square feet average. Height times width times 80% for rounded corners. Drag factor is C sub d and is .3 on average. Therefor the aero drag is .3 X 25 square feet times the dynamic pressure at 60 MPH which is six pounds per square foot. .3 X 25 X 6 = 45 pounds of aero drag. 60 MPH is 88 feet per second. HP is therefore 88 X times 45 or 3960 pound feet per second. Divide that by 550 to get HP in terms familiar to the public. 3960 / 550 =  7.2 HP. Double that for tire rolling drag and you get 15 HP. Assume the drive train is 80% efficient so we are looking at 19 HP out of the engine.

Here is another way of calculating it. Assume for the moment it is 20 HP and the BSFC is .5 giving the engine the benefit of the doubt. That means the engine is  burning 10 pounds of  fuel per hour. Fuel weighs 6.25 pounds per gallon so we have burned  1.6 gallons of fuel to go 60 Miles or 37 MPG.

One can change these key variable numbers anyway you want.
One can change the speed which will have the largest affect on the HP and MPG.
One can change the frontal area. Height times width times 80%.
One can change  the BSFC in the range of .4 to .6. .4 being real good.
One can change the proportion of rolling drag to aero drag. 40% to 60%.
One can change the aero drag factor. A Prius is .26 and a Ford Model A is .5.

The bottom line is  no matter how one manipulates the numbers one will still come out with a number of less than 40 HP. This is also the reason 300 to 400 HP car piston engines are very light duty indeed and do not make good aircraft engines.

One can write a QB program in less than half an hour to do the calculations for for any of the various key variable numbers.


Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.