what would be the minimum size of the the cowl opening for maintaining
MP pressure at 6500 engine rpm at slow speed, say 45 mph? thanks
richard in nc
I cannot begin to guess as there will be a slight pressure loss
with a 6.28 square inch opening. That is about a 3 inch diameter hole.
For a p-port engine. Dynamic pressure is only .036 psi at 45 MPH or 66 feet per
second. The 3 inch hole area is .0436 square feet so the flow unobstructed would
be 173 cubic feet per minute while the engine is breathing around 300 cubic feet
per minute WOT at 6500 RPM. There will be a slight pressure loss.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.