Subject: I am thinking of building some RX8 mufflers.
From: Rotary Engine
Date: 12/3/2009, 5:38 AM
To: AAA Put this in the To box




 Is anybody interested in buying some RX8 mufflers.
 It will look something like this but better workmanship :)
 I could also make a kit if you can weld.

 The stock RX8 exhaust header can not be turned around.
 It comes out on the wrong end for a tractor.

 Paul Lamar

Hi Paul,

Great!  I've been hoping someone would start making components for the RX8. Would this be a true muffler with a baffle configuration inside?  I would be very interested in one for my 6 port Renesis depending on cost.  Could you please post some more info on this.

PS: Would be great if someone would offer a bolt on intake as well for the RX8 for some of us that don't want to go with a P-port.

Thanks,
Bob Forbes
Upstate NY

No baffles inside. Every piece of metal will be exposed to the air on one side for cooling purposes. Any time you put some baffles inside you risk melting the baffles and restricting the flow causing a loss of power.

Something like this.


Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.