Is anybody interested in buying some RX8 mufflers.
It will look something like this but better workmanship :)
I could also make a kit if you can weld.
The stock RX8 exhaust header can not be turned around.
It comes out on the wrong end for a tractor.
Paul Lamar
Hi Paul,
Great! I've been hoping someone would start making components for the RX8.
Would this be a true muffler with a baffle configuration inside? I would be
very interested in one for my 6 port Renesis depending on cost. Could you
please post some more info on this.
PS: Would be great if someone would offer a bolt on intake as well for the RX8
for some of us that don't want to go with a P-port.
Thanks,
Bob Forbes
Upstate NY
No baffles inside. Every piece of metal will be exposed to the air on one side
for cooling purposes. Any time you put some baffles inside you risk melting the
baffles and restricting the flow causing a loss of power.
Something like this.
------------------------------------------------------------
I made some changes in the traditional design to simplify the fabrication and
welding. Some dimensions will change slightly. It is designed to fit Jeff motor
plate. Mufflers work by rubbing off kinetic energy and heat on the surface of
the muffler. The more surface area the quieter the muffler. That is one reason
this muffler has a concentric tube welded down through the center.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.