Hello Paul

 Can you recommend some companies that can supply parts for
 me to build a three rotor engine out of 13b parts
 (e-shaft, etc)? 20b`s are as scarce as anything here in
 Australia. Hellishly expensive if you can find one.


 Regards,

 Erik in Oz.

 There used to be an outfit in Victoria called Guru Motorsports that
 could do that sort of thing. They may have changed their name to:
 X-Treme Rotaries
 26b Brett Drive,
 Carrum Downs, Vic, 3201

 P: +61 3 9775 0288
 F: +61 3 9775 0286

 Here in the states there is a guy that lives in North Carolina by
 the Name of Bruce Turrentine. I know he has built up some 3 rotors
 using 13B parts.
 Contact Tracy Crook for Bruce's telephone number. This outfit might
 know Bruce as well:

 RotorSports Racing
 465 Russell Farm Rd.
 Kannapolis, NC 28081
 704-933-6222
 info@rotorsportsracing.com

 Mazdatrix in Signal Hill Ca had one for sale a couple weeks ago for
 $5,000 US.

 Mazdaspeed here in the states sells 3 rotor p-port engines to racers
 but they are not cheap. Running $30,000 as I recall.

 Maybe your best bet is Japan. People are still getting Cosmo 3 rotor
 engines from Japan.

 Paul Lamar

My 3 rotor is for sale and happens to be build up out of 13 b parts by
Bruce Turrentine.
Contact me off list if you're interested.

No Paul, this doesn't mean I'm giving up on a rotary install.  I did
jump the gun on the 3 rotor, since we originally designed for a 2
rotor.  Pesky weight and balance.

Chris Cosman
ccosman@comast.net


http://www.mazdatrix.com/getprice.asp?partnum=20B-GURU-SHAFT

For about what a 20B shaft will cost you can get a whole 20B engine.

http://cgi.ebay.com/ebaymotors/Mazda-Cosmo-Eunos-Rx7-20B-REW-3-Rotor-Twin-Tu
rbo-Engine_W0QQcmdZViewItemQQhashZitem5ad52c57b2QQitemZ390123509682QQptZMoto
rsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Jay