Subject: On several completely different topics
From: Rotary Engine
Date: 12/10/2009, 7:04 PM
To: AAA Put this in the To box


   On a completely different not I am going to attempt to attach a
 picture from the PPRE site which shows their take on placement of p-port
 injectors and answers someones question about a throttle plate within the
 tuned length intake tube. Take a look at the inline waterpump!!!!!!! looks
 light and could be mounted at the exit of the radiator for the same
reasons
 fuel pumps are located in the tanks of modern cars. They might be on to
 something about ramming the waterpump at it's optimum RPM independant of
 e-shaft RPM. They have also apparently been able to add a stationary gear
 and bearing to a 13B center housing although a custom e-shaft is required.

 george grimes

 Focus George :)
 The picture did not attach. What email software are you using?

 Rotaries for the millionair.

 http://www.pulseperformancere.com/prodpack.html

 The New Zealand Dollar is 72 cents U.S. so the prices are not quite as bad
 as they look.

 I like their way of looking at things :)

 Putting the butterflies there destroys the organ pipe tuning effect and
the
 idle.

 The water pump should be mounted much lower. I can't tell anything about
 the pump from looking at the picture. It does not look like a centrifugal
 pump.
 How is it driven? If electric it is not up to continuous high HP use.

 Here are some pictures from the web site.

 Paul Lamar



--Hello there,

Im not sure if this email was generated for us, however thanks for your
intrest.

Please don't hesitate to email us any questions that you may have regarding
any of our packages or any custom requirements that you may have.

We regularly send proven packages & custom parts to the US.
Kind regards
Warren

Warren Overton
Managing Director
Pulse Performance Race Engineering Ltd
Corner London & Barrack streets
Wanganui
New Zealand
++646 343 5033
pulseperformance.re@gmail.com

Warren please send us more details on that inline water pump on the four
rotor.

Paul Lamar


Hi Paul,

It is a unit from "Stewart" which are manufactured in the US,

I have found that the unit functions well under tough conditions & to date
has been very reliable.

Kind Regards
Warren

Warren Overton
Managing Director
Pulse Performance Race Engineering Ltd
Corner London & Barrack streets
Wanganui
New Zealand
++646 343 5033
pulseperformance.re@gmail.com


What sort of tough conditions?
How fast can you drive in New Zealand for how long?

Paul Lamar

-
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.