Paul

These msgs were my latest with TekEdge. Shortly after I acquired a different unit and left this one for a rainy day project. I had forgot about the O2 heater ckt being shut down. I think its due to the corrupted firmware and the hardware is good. Anyway if you can decipher the download instructions it will probably work again. Funny thing after building it, I had no problem with loading down their firmware and getting it going. It was the newer firmware where things went wrong.

regards Robert

Thanks Robert. I have enough info to trouble shoot and repair it if necessary. I made a new folder and put all those messages in it for future reference.

Paul lamar