This is heavy duty SS and was originally designed by Bill Jeppson and others.
The idea was to use the exhaust gas to suck cooling air through the muffler.
No doubt that would work at higher powers but exhaust gases came out the front
at idle. It has been kludged up by an unnamed person but it can be fixed rather
easily. It won't work on most tractors as there is not enough room for the large
tail pipe bend. You need about a foot clearance between the back of the engine
and the fire wall. Would be ideal for a pusher. Or it could be converted to a
simple tang muff by blocking off the back, leaving a hole for the cooling pipe,
with the down pipe coming out the side.
I'll ship it to anybody in the US for $100 cash.
The SS metal and SS flange is worth that.
send the cash to :
Paul Lamar
830 East Santa Maria St
Suite 303 Very very Important.
Santa Paula CA
93060
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.