Subject: inlet duct wedge,
From: Rotary Engine
Date: 12/16/2009, 2:09 PM
To: AAA Put this in the To box


Paul,
           Thanks for the cooling book which gives so many practical ways to cure my problem.  The wedge, does it taper to be flush with the rear of the Rad, or should it be up say a half inch?  I assume that the inlet is to be the magical 1/3 of the area of the Rad ?  I expect that my actual inlet will only be about a foot before the rad, so is it better to go wider with the inlet rather than higher?
    THe curve before the outlet on the firewall, I have heard of this many times, but have never been able to get a drawing.  Have you dimentions etc available ??
    Thanks for a great book.  Met Fred Moreno at an Saaa meeting only a month or two ago.  His Lancair is flying at last but with a Lyc!!.   What happened? He now lives south of Perth which you probably know.
    Neil.

----------------------------------------------------------
I think that may be a different Fred Moreno. Did he say he was on our news letter? If I had known he was there I would have tried looking him up when I was in Perth early this year.

The end of the wedge must be right down on the core. In fact Ian out in Perth claims it is well worth doing the S curve trick. Second attachment Fig 4. He has reduced the size of his scoop drastically on his second RV6 and it is not cool in Perth during the summer time :)

http://www.youtube.com/watch?v=uZ4NqGv6SwQ

To answer the question on the size and shape of the scoop I need to know how fast your airplane flies. Slower airplanes can use larger openings to cool at lower climb out speeds. Also the use of a cowl flap is a factor. A nice cowl flap will allow a smaller scoop. I assume you have an RVx something or other.

BTW folks don't be taken in by the supposed need  for a smaller pulley on the e-shaft to cut down the water pump speed. That may be true on a racing engine that is going 11,000 RPM but we never see more than 7500 with a 2.85:1 gear box and 6500 with a 2.17:1 gear box.

Also there is a remote possibility that taxi cooling can be helped by more water flow. Some body needs to do a little data taking on that subject one way or the other.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.