Subject: Please write to Pratt & Whitney and ask for a turbo compound RX8 engine.]
From: Rotary Engine
Date: 12/18/2009, 10:52 PM
To: AAA Put this in the To box


 I think they could sell it to the experimental market and gain priceless
 customer experience not to mention cash flow. That would save years.
 People
 building airplanes are several steps ahead of the average pilot
 technically
 speaking. Not selling more engine parts to the experimental market was a
 mistake
 Mistral made. I think the experimental market is about 30% or more of the
 total
 light aircraft market.

 Paul Lamar


They should definitely do this to gain experience and feed back - that said
will they? I agree with the Mistral mistake but it is not uncommon.
Companies are afraid of educating their competition with early
preproduction
releases, including parts thereof.

The problem is most of this type of innovation in aircraft engines are not
supported with any or very good patents that cannot easily be overcome with
similar but different approaches. PW may have a good patent but they
certainly have the capital to defend it otherwise.

Releasing early models (parts) for flight testing, notwithstanding the IP
concerns, is IMHO the way to go. Very, very few people and or companies
will
be able to finance a real threat especially given your lead (whatever
patents you may have). The cash flow, sales revenue, experience, did I say
money!! from these sales will help a great deal especially for a small
company.


Cheers
Brian Feeney
DreamSpace Group

Paul, I look on Curtis Wright having renewed interest in rotary engines as
a good thing. They have also led the way on turbocompounding 70 years ago
with their large radials and had a rotary engine in the 70's of GA size that
had the usual  TBOproblems plaging other rotary manufacturers 50 years ago
which have long since been solved by Mazda. If as the previous post suggests
they would look for a ower fuel burn than their 750 to 1100 HP turbines and
they are using 3 to 5 atmospheres and intercooling their rotor displacement
would  be in the neighborhood of the two and three rotor mazdas  although
they would likely design a new engine with something like ceramic rotor
housings and end housings for their claimed desire to reduce heat loss to
the cooling system, and possibly ceramic rotors also.

 Buying components from Mistral would have been problamatic due to
the 40K pricing of their engine.. Parts always cost three times as much as
the assembly line components which in Mistral's case an end housing would
cost twice as much as a factory new complete Mazda engine. They have
interesting parts but couldn't think of selling non certified pieces at a
price homebuilders could pay. When we step up to Curtis Wright  we enter
aerospace pricing. Suddenly Lycoming cylinders will seem cheap.

In the same way that technology from GTP cars and Formula 1 filter
down to the rest of us any aerospace technology applied to rotary engines
will eventually benefit homebuilders.

george grimes


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.