Subject: Pratt & Whitney turbo compound rotary.
From: Rotary Engine
Date: 12/19/2009, 5:36 PM
To: AAA Put this in the To box

 Pratt & Whitney patented the turbo compound rotary in January of
 this year :) Perhaps something good can come from this.

 Jonathan Lauter was on here for a long time. Also worked for RPI.
 Getting a patent is one thing. Defending it something entirely different.
 Once an idea is published it is not possible to get a valid patent.

 Suppose I applied for a patent on the steering wheel? :)

 The patent office is run by the fed therefore by definition they are
 incompetent :).

 http://www.rotaryeng.net/NASA-Paper-turbo-compound-rotary.pdf
 http://www.rotaryeng.net/turbo-compound.html

 Paul Lamar

  Hi Paul,
  What is the approximate timing events of your P-port housings. The patent
application is clear in the use of Miller cycle timing events, which appear
to be different than what you or other P-port users have. Not that it makes
any difference to the private TC builders. Parts could be availeable if they
introduce engines, if they would sell to non-certified buyers. Even then
copying the sizing would help private builders.

Dale Davies

We use Lemans engine timing.
Miller cycle helps at low power settings as it cuts the pumping and compression losses at part throttle operation. It does not do much for you at AC power levels.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.