Modine has a great step by step out on how to select an oil cooler. It is
8
meg so I can't email it but I did just upload it to the web site. I
suggest
everybody download the pdf.
http://www.rotaryeng.net/Modine-calc.pdf
This is a real Christmas present for us as it takes some of the guess work
out of choosing an oil cooler that works.
There is a some information you will need to know about the rotary.
You will need to know the HP you are trying to cool.
For that you need to look at this heat balance chart.
I have modified the chart to make it easy for a 200 HP side port 2 rotor
but
if you have a p-port two rotor you will have to multiply the oil cooling
HP
number by 1.25. That means a 250 HP p-port engine running at best power
mixture of 12.5 to one is rejecting 63 HP or 25% of the net HP out of the
engine to the oil.
You then plug this number into the Modine equations to figure out the
number
of BTU's per minute you will be rejecting.
The next thing you will need to know is the GPM of the oil pump through
the
system. The stock number I think for the 2nd gen engine is 1.3 GPM at 1000
RPM.
At 7000 RPM it would be seven times that or 9.1 GPM. That number is
somewhat
dependent on the oil system plumbing and the size of the cooler. A larger
cooler with more tubes is going to allow the pump to flow a bit more oil.
Also right angles in the oil gallery of the engine also reduces the flow.
More about that later. Lets say it is 10 GPM for a 2nd gen oil pump.
I think the 3rd gen pump is larger and the 3 rotor may be larger yet but I
have no hard data yet. You will probably need to make some assumptions
about
that.
Perhaps someone on here has measured the 3rd gen pump oil flow. I think
Mistral did that and I may be able to find it.
Follow the first 3 steps in the pdf.
Note the lower the Viscosity of oil the better it cools. Use Idemitsu
rotary
engine oil. I used to use Mobile 1 SAE 15 weight for 15 years but I am now
using Idemitsu. I think Mazdatrix sells it.
In Step 4 you enter the Modine chart called Curve 1 and you pick a LAB
130.
With a LAB 130 you will get a very low oil pressure drop across the cooler
amounting to only a few psi. A Lab 130 core is about 22 by 22 by about 2
inches thick. A smaller core will probably work as the airflow will be
higher than what is called out in this PDF.
Continue following the steps in the PDF to calculate the pressure drop.
What is missing here is the airflow data.
Paul Lamar
When trying to open that link I get "file does not begin with %PDF- " and
it
will not open. Im using IE8.
C. Smith
I just tried it with Firefox and it left clicked and right clicked.
Anybody else having trouble?
What OS are you using now?
Paul Lamar
Paul,
I had the same result as C. Smith had. I'm using IE.
Mark S.
What OS are you using?
http://www.rotaryeng.net/CW-aluminum-rotor-patent.pdf
Does this link download?
Log on to the web site and scrol down to Tech Topics and then click on How
to
Cool. Try getting it that way.
Paul Lamar
The second link worked fine, don't know what is the difference, but I've
seen that error before. It was on a CD from Zenair for assembly pictures and
documents. OS is Win 7.
Sorry, tried a dual boot of Ubuntu on my laptop, and it plays havoc with
windows. Have to run startup repair every time I want to boot windows(takes
about 20+ min to run). I see no advantages with linux vs Win 7. Rhetoric
aside, Linux, in the free distros like Ubuntu are experimental software for
programmers only.
C. Smith
It does not work well on just any laptop computer as laptop hardware is not
standardized like desk top computers are standardized. The exception is the
Linux Azus EeePC which is the most bullet prof computer I have ever owned and I
started with the Kim 1 in 1973 which predated the Apple II. I owned a computer
store for 25 years and I was familiar with half a dozen different operating systems.
I have have been using Linux for 11 years and I have yet to write a Linux
program :) There is no reason to dual boot as I have plenty of obsolete
computers to run legacy windows software such as Rhino. Dual booting is asking
for trouble,
I have never paid money for a Linux program either and everything you see on
here was done with Linux with the exception of Rhino files. People send me all
sizes of jpgs that I must scale and crop. I also maintain my web site using only
Linux software. In 11 years I have never had a virus and I run no virus software
of any kind. I do not have to "activate" the software and up dates are
automatically downloaded and installed for free on a weekly basis and this
includes all the software I run. The only time I ever paid for the OS it came
with a 1000 page book explaining the inner workings of the OS. Information that
is totally unavailable for any Microsoft product.
I went on the Modine site and could not find that pdf so I will break it apart
and send a series of jpgs.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.