Subject: Rotary CR and working it out
From: Rotary Engine
Date: 12/23/2009, 1:12 AM
To: AAA Put this in the To box


Hi,

From 1969 to 1993 I worked on development of the BSA and
then the Norton Rotary engine, I wrote many of the
programs that allowed us to machine and make Master cams for the shapes.

One item always eluded me and that was working out the
CR and for purely academic reason I would like to complete
this program, I would be grateful if you could give me
some worked examples data.

R'=R+a : e : B : Radial flank clearance :
Width clearance & finally rotor pocket volume.

In my worked example based on the Norton Rotary

R'= 71.5 mm e= 11.6 mm : B=68.2 mm :
Rflank Clearance = 0.5 mm : side clearance = 0.15 mm

pocket volume = 28.24 cc = 7.5 to 1

pocket volume= 22.18 cc = 10.0 to 1

Could you please check my figures

Bob Rowley

Tamworth UK

-----------------------------------------------------------------------

Dear Mr. Rowley,

I wish I could be more helpful, but I do not
have access to those figures.  You might
check with Paul Lamar, www.rotaryeng.net,
as he enjoys a most robust fund of knowledge.

Regards,

Stephen Roth, Operations Manager
Mistral Engines USA, Inc


Paul
I that this get's to you and you could give me
some worked examples of the Rotor pocket volume
to go with the R'=R+a : e and the width of housing.

Why do I want to have the information, purely
Academic reasons not commercial, just one of
the unfished projects as I designed the Gears,
Rotors, Housings (well programmed them) in the
early 70s to use numerically controlled machines,
and the Compression Ratio was then worked out
by me filling the pocket with Plasticince and
scraping a ruler around the flank of the rotor,
I would pass the fluid displacement measurements
to our Mr David Garside (OBE) and he would go
into an huddle with is slide rule and come
back with the Compression Ratio.

Bob Rowley

Tamworth

UK

The volume varies with the year. A rotor I have
here in my office is 10 mm deep. Mean width is 48
mm and it is about 77 mm long. CR is roughly 9.6.
Housing width is 80 mm.


You can download Kenichi Yamamoto's book "Rotary Engine" from this
web site. It contains most of the dimensions on the Mazda rotary.

http://foxed.ca/foxed/index.php?page=rx7manual

Other info is scatered throughout the tech papers on our site.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.