Seasons Greetings



Matt,

I was doing my annual note organizing and I came across the files on the
Nissan data.
On the Excel table I have a notation the data is in mg/sec.

On the Nissan Infinite g20 graph the bottom line represents voltage and
the numbers should read from left to right as follows.   0.1 , 0.5, 0.9,
1.3, 1.7, 2.1, 2.5, 2.9, 3.3, 4.1, 4.5, 4.9, 5.3, 5.7, 6.1.
Please correct Paul's graph as it appears the numbers are off.

Again after 4.8v the sensor doesn't have any real resolution but those
airflows are so low it doesn't matter.

Let me know if you need anything else.

Presently I have the sensor mounted down stream from the ROTREX Super
charger and will bring the feed into a simple flow bench that  can match
the throttle and or the rotor housings, intercooler etc.

Cheers

Doug

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.