Subject: Flow restriction for reducing manifold pressure noise
From: Rotary Engine
Date: 1/10/2010, 3:06 PM
To: AAA Put this in the To box



This is for those of you considering using an orifice-volume type low pass filter to reduce high frequency pressure noise from the manifold sense port.

 Small orifices are prone to clogging and are hard to control.  Some type of large area flow restrictor is usually better.  Attached is an example of what can be done with sintered metal particle technology.

Craig Taylor





-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.