Paul, there is a Brass check valve (I think) in the Oil metering
holes in the rotor housings... Should these be removed before
installing the Pressure Taps?
Mike C.
That would be news to me.
The check valve is in the screw in oil nozzle.
That is what makes it unworkable for monitoring
the intake system pressure for EFI use.
Paul Lamar
My 20B rotor housings have the brass jets also. Think they are just
jets and not check valves but I haven't removed them yet.
Don
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.