I take it that none of this is applicable to the 13b block.
C. Smith

You are right. You may need to cut down the 2nd gen 13B pump
to fit under the cowl so we have a different procedure
for doing that. It also increases the water flow
by reducing some restrictions in the plumbing. Let me
know if you want to see that.

BTW Jeff, I had another idea for the RX8 version and that is
adding a filler neck for a stock 30 psi pressure cap.

We have had trouble with the welded versions in the past.

Paul Lamar


Paul, can a Renesis front cover/water pump assembly be used on an older 13b?

Everett

Yes I think it can. As I recall somebody did it.

Paul Lamar