Hi Paul

Did someone have all dimensions of  the shaft flange , i need those one to
design the shaft
for my twin  project.

Paul i want to know if we can buy from Tracy the  housing aluminum casing
unmachined it can
be suitable on my  design

Jean Prudhomme


Here are the dwgs for  the SAE prop flange. There are two
common sizes one for metal props  and a larger one for wood props.

You will have to ask Tracy  about getting un machined housings.

Paul Lamar

Thank,s Paul

On your sketch they dont show the  flange thickness and the pilot dept, do
you have those
dimensions

Jean Prudhomme

I don't have those dimensions here. My guess is make it 3/8th of
an  inch thick or about 10 mm.

I have one of Tracy's flanges up at the  hangar but I probably
won't be able to go there as I need to monitor the  house to keep it
from flooding. I have got to get the pump ready to  go.

We have an underground river and it comes through the basement  walls
when we have this much rain every five years or so.

Paul  Lamar



I think those dimensions are spelled out on tracy's site

Rich