Hello Paul & group,

 I promised to make a 45 min aircraft rotary prensentation for the winter
 meeting of our local EAA equivalent. I have about six weeks to put it
 together.

 I thought to address this from the viewpoint of builder, thus the
 salient points could be:

 - How much there is 'em? Flying and being built? (Tracy's PSRU sales?)
 Several hundred.

 - How much accumulated flight hours? What's highest? Experience?
 up to 2400

 - Likely MTBO, MTBF
 3000 hours

 - Compatibility with 100LL/autogas/heavily ethanol-blended gas (=10%)
 anything depending on what the fule tank is made of

 - Installation weight, price, power, consumption
 320 pounds fire wall foreward +/- 20 2rotor. 420 pounds 3 rotor.

 - Noise and vibration
 High noise 100 db 30 feet away. Depends on muffler. Low vibration.

 - Models: 100/200/300+ hp, Rotax 912/O-200, IO-360, IO-540 equivalents,
 250 HP 2 rotor. 375 HP 3 rotor. Both p-port.

 -weight, price & consumption comparison.
 see above. Price  $5000 2 rotor  $10,000 3 rotor. BSFC .47 cruise

 What's our current knowledge of these issues? Please comment.

 If we can come up with something like presentation kit, it would be
 easier for everyone to keep one.

 Cheers,
 Petri

 Hi Petri,
 Beg, borrow, or steal Mark S.'s power point presentation on the rotary.
 It is excellent, well organized, and easy to present.
 Run through the presentation at home several times, you'll need to trim it
 to be
 45 minutes.
 Hard copy each screen so while your assistant worries about advancing the
 computer's projections you can view the copy and keep eye contact with your
 audience and
 field
 questions as they come up. AND QUESTION YOU, THEY WILL ; )
 Show and tell parts are great especially if you can show an e-shaft, an
 auto
 crankshaft, and a Cont or Lyc crank all at the same time and note to
 the members which of the three looks hefty enough to bet your life on!
 A word of caution, most EAA's are firmly rooted in Cont and Lyc engines.
 DO NOT badmouth Cont or Lyc, you'll only alienate most of your audience.
 Tell the rotary story on facts and let the listeners make their own
 conclusions.
 ( But, it's OK to bash conventional auto engines ; )
 I made this presentation a year ago and I'm still the rotary "go to " guy.
 Good Luck and have fun. Dave M

 I'll get Mark's email address to Petri privately. Petri lives in Finland
 so he is unlikely to have Lycoming parts Lying around.
 Petri did the filming and editing on these Videos done
 at Aero last year.

 http://www.youtube.com/watch?v=7Z5EEUTTWUY
 http://www.youtube.com/profile?user=UTUBPLEASE#p/u/1/lQ7sNEJy2Us
 http://www.youtube.com/profile?user=UTUBPLEASE#p/u/2/qjE_CeYsOAk

 Paul Lamar


 Hi Paul,

 Would you mind forwarding Mark's contact info to me off list also? I'm on
 the
 program committee for our local EAA chapter and would like to give Mark's
 presentation as well. Most of our members know I intend to power my -9A
 project
 with a 13b and there have been more than a few raised eyebrows. It would be
 good
 to give them some straight information about rotary engines to counter
 their
 'air cooled and opposed is the only way to go slant'.  Several members have
 Rotax 912's and 914's in their aircraft and those seem to be accepted but
 not
 the idea of auto engine conversion.

 Thanks,

 Jack Hilditch

 Will do.

 I thought by now the whole aviation world would understand
 the superiority of the rotary engine :)


 Paul Lamar



Paul,
would you ask Mark to Forward me a copy as well?  As you know I often do
presentations but my "presentation" is more of just a collection of
pictirues.