Subject: Status of the Zenair 801 in the works.
From: Rotary Engine
Date: 1/28/2010, 8:40 PM
To: AAA Put this in the To box


OK, you asked for it!

First photo is my redesigned top-center mount. I extended the old mount up 1" to allow
clearance over the renesis. The bottom 4 bolts carry through the windshield strut mounting
plate; top 3 just bolt to the firewall / channel. The holes in the channel sides are for
rivets. It's a zenith, you can't assemble any part of it w/o rivets.

Kenny

Nice work Kenny.

--------------------------------------------------

With top strut you don't need the lower rear motor mount.
The top strut will do it all.

Paul Lamar