Hi Kenny,

I finally went on your web site and captured some pictures
of the lower mount. Thanks for posting those as it added
valuable feed back on the design. The part about the bungee
rubbing on the brackets in full down was news. Sorry.

Those brackets are well over designed especially since you
are using the top mount as well.

I think you can take 3/4 of inch of material off the
top parts of the brackets with no downside. It is way
over designed.

Also use button head screws. These are overkill by
a factor of 10 :)


Does the lower fixed bungee tube pass through the brackets?
I can't see it in the pictures.

Paul Lamar