Subject: another big file Emailing: DSCN0456
From: Rotary Engine
Date: 2/4/2010, 8:13 AM
To: AAA Put this in the To box


This is the CH 640 firewall built up.
C. Smith

Are those monel pop rivets or aluminum?
They should be monel. Much stronger and more fire
proof than aluminum pop rivets. I started using these
around 1970.

http://www.hansonrivet.com/w18.htm


I think your email programming is reducing the file size
automatically.

Paul Lamar

From my understanding, they are "avex" rivets.
A major aspect of the Heintz assembly process is
using the counter sunk rivets, with a domed head puller.
The doming process during the pull work hardens the head somewhat.
In certain areas, AD rivets are used.
I may just go with your monel rivets when I get to
that stage, your arguments are sound.
C. Smith

I have used these on dozens of 600 HP race cars wings that take a real
beating as they were attached directly to the suspension
uprights.

Paul Lamar

The corrosion issue is definately the top concern. I would
think that this has been considered in the canopy kit, and
it very well may have special rivets for that particular
application. It was not a topic of discussion while I was
there, as I was not aware of the issue.
When I purchase the canopy kit, I will take special care to
identify the rivet type. If they don't supply them, I will
get them myself.
Milling done on 13b water pump mod, coming along nicely.
Will send a few photos later, if my home connection is back
up today.


C. Smith

Thanks.
We can always use more pictures of the water pump mods.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.