Paul,
Any suggestions for a lightweight starter that will fit the 13B? This is
the latest
bottleneck, before I can finish modeling the Bell housing and PSRU. I
think I tossed the
1985 boat anchor that came with that housing.
Doug
They are all about 7 pounds. You have a real problem because
the Bell 47 PSRU has no room for a ring gear. You might have to install
a ring gear on the front of the engine. The DG 1 had a gear drive starter
generator in the front mounted accessory case. Not as heavy as it seemed
because it was doing two jobs. GM has some belt drive starter generators
on some new 2009 Chevy-Malibu so-called pseudo hybrids.
http://alternativefuels.about.com/od/2009hybridreviews/ig/
2009-Chevy-Malibu-Hybrid-/Malibu-Hybrid-motor-alternator.htm
"The motor/alternator of the Belt Alternator Starter
(BAS) hybrid system is driven by a high tension belt
from the engine crankshaft. It boosts power under
acceleration, charges the battery, and restarts the
engine after AUTO STOP."
I think that is your best bet.
Paul Lamar
Paul,
That accesory drive case looks just like the one on a solar turbine. Do you
know if Dave adapted it?
Bill Jepson
I think it was custom made by Racing Beat. Jim Mederer built aircraft engines
for others as well. This one is particularly cosmetic :)
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.