Subject: Dave Garber's bell 47 PSRU.
From: Rotary Engine
Date: 2/8/2010, 9:14 AM
To: AAA Put this in the To box



 Paul,

 Any suggestions for a lightweight starter that will fit  the 13B?  This is
 the latest
 bottleneck, before I can finish modeling  the Bell housing and PSRU.  I
 think I tossed the
 1985 boat  anchor that came with that housing.

 Doug

 They are all about 7  pounds. You have a real problem because
 the Bell 47 PSRU has no room for a  ring gear. You might have to install
 a ring gear on the front of the  engine. The DG 1 had a gear drive starter
 generator in the front mounted  accessory case. Not as heavy as it seemed
 because it was doing two jobs. GM  has some belt drive starter generators
 on some new 2009 Chevy-Malibu  so-called pseudo  hybrids.

 http://alternativefuels.about.com/od/2009hybridreviews/ig/
 2009-Chevy-Malibu-Hybrid-/Malibu-Hybrid-motor-alternator.htm

 "The  motor/alternator of the Belt Alternator Starter
 (BAS) hybrid system is  driven by a high tension belt
 from the engine crankshaft. It boosts power  under
 acceleration, charges the battery, and restarts the
 engine after  AUTO STOP."

 I think that is your best bet.

 Paul Lamar


 Paul,
 That accesory drive case looks just like the one on a solar turbine. Do you
  know if Dave adapted it?
 Bill Jepson

 I think it was custom made by Racing Beat. Jim Mederer built aircraft
 engines
 for others as well. This one is particularly cosmetic :)


 Paul Lamar


Paul,

The GM Belt Alternator Starter (BAS) requires 36 volts to run.  What you
would save on starter weight, you lose on having to carry two extra
batteries.

Caption for the picture reads, "The black box with the blue cable houses the
36-volt hybrid battery that powers the motor/alternator for engine assist as
well as restarting the engine from AUTO STOP mode. Protective cover removed
for photo."

Mark S.


That certainly is a drawback for most of us.

The batteries can be smaller as power is power regardless of the voltage.
Battery power is a fixed function of battery weight. A starter requires
roughly 3 HP or 2300 KW. At 12 volts that would be 186 amps.
At 36 volts that would be only 62 amps. Certain devices like CD ignition
systems work better with high voltage as they are already converting
12 volts to 400 volts.

One could use 3 small motor cycle batteries. Wired in series.
One could also use lithium ion for a better battery power to
weight ratio.  In some cases one would need a custom designed
voltage switching converter to convert 36 volts to 12 volts
for powering radio's and other stuff.

In Doug's case he has little choice. Doug is in love with
electricity anyway as that is his main biz :) Here is a picture
of his electric car powered by solar wind turbines in the
back ground. He is the perfect man to do the development.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.