Paul,
Any suggestions for a lightweight starter that will fit the 13B? This is
the latest
bottleneck, before I can finish modeling the Bell housing and PSRU. I
think I tossed the
1985 boat anchor that came with that housing.
Doug
They are all about 7 pounds. You have a real problem because
the Bell 47 PSRU has no room for a ring gear. You might have to install
a ring gear on the front of the engine. The DG 1 had a gear drive starter
generator in the front mounted accessory case. Not as heavy as it seemed
because it was doing two jobs. GM has some belt drive starter generators
on some new 2009 Chevy-Malibu so-called pseudo hybrids.
http://alternativefuels.about.com/od/2009hybridreviews/ig/
2009-Chevy-Malibu-Hybrid-/Malibu-Hybrid-motor-alternator.htm
"The motor/alternator of the Belt Alternator Starter
(BAS) hybrid system is driven by a high tension belt
from the engine crankshaft. It boosts power under
acceleration, charges the battery, and restarts the
engine after AUTO STOP."
I think that is your best bet.
Paul Lamar
Paul,
That accesory drive case looks just like the one on a solar turbine. Do
you
know if Dave adapted it?
Bill Jepson
I think it was custom made by Racing Beat. Jim Mederer built aircraft
engines
for others as well. This one is particularly cosmetic :)
Paul Lamar
Paul,
The GM Belt Alternator Starter (BAS) requires 36 volts to run. What you
would save on starter weight, you lose on having to carry two extra
batteries.
Caption for the picture reads, "The black box with the blue cable houses
the
36-volt hybrid battery that powers the motor/alternator for engine assist
as
well as restarting the engine from AUTO STOP mode. Protective cover
removed
for photo."
Mark S.
That certainly is a drawback for most of us.
The batteries can be smaller as power is power regardless of the voltage.
Battery power is a fixed function of battery weight. A starter requires
roughly 3 HP or 2300 KW. At 12 volts that would be 186 amps.
At 36 volts that would be only 62 amps. Certain devices like CD ignition
systems work better with high voltage as they are already converting
12 volts to 400 volts.
One could use 3 small motor cycle batteries. Wired in series.
One could also use lithium ion for a better battery power to
weight ratio. In some cases one would need a custom designed
voltage switching converter to convert 36 volts to 12 volts
for powering radio's and other stuff.
In Doug's case he has little choice. Doug is in love with
electricity anyway as that is his main biz :) Here is a picture
of his electric car powered by solar wind turbines in the
back ground. He is the perfect man to do the development.
Paul Lamar
Paul, Do you have a guess where to get a part number and price for the
alternator/starter. I like the idea of using three riding mower batteries
in
series for the starter and charging. With a composie airframe having ground
wire requirements anyway, puting the batteries in series for charging and
starting and parallel for other functions seems doable. Also I could
segregate avionics, lighting, and engine off the three batteries. If the
cost is similar to the combined price of a new starter and alternator which
I have to buy anyway for the four rotor it sounds perfect for me.
My airframe will be a prototype where battery weight is useful for
adjusting CG and as an added advantage the cable weight reduction from the
36 volt system is at least 8 pounds for a behind the seat battery location.
I haven't found anything more on the internet than was repored
here. The engine displacement and cranking speed comparison to a rotary
will
need to determined, but it has possibilities.
george grimes
I have no idea but they will be in junkyards sooner or later.
Switching from three in series to 3 in parallel is very doable
now a days because of advances in solid state switches.
Paul Lamar
Paul,
I like the idea, but it looks like the first gen BAS is not living up to
expectations, but may be fine for our needs. GM is supposedly coming out
with a more powerful BAS in the 2011 models. May be worth the wait.
Ref.
http://green.autoblog.com/2009/06/11/gm-to-discontinue-mild-hybrid-malibu-vue-aura-for-2010-model-y/
Mark S.
Looks like a new generation BAS on the market for 12v systems.
http://images.google.com/imgres?imgurl=http://cms.ukintpress.com/UserFiles/Generator-(B-ISG).jpg&imgrefurl=http://www.enginetechnologyinternational.com/news.php%3FNewsID%3D16188&usg=__5QDdw19dUnpAT_CulmY3J7t5gn4=&h=258&w=300&sz=24&hl=en&start=27&um=1&itbs=1&tbnid=IKD0foz035OGuM:&tbnh=100&tbnw=116&prev=/images%3Fq%3Dgear%2Bdrive%2Bstarter%2Bgenerator%26ndsp%3D18%26hl%3Den%26rls%3Dcom.microsoft:en-ca:IE-SearchBox%26rlz%3D1I7ADFA_en%26sa%3DN%26start%3D18%26um%3D1
"It's being reported that among the models that General Motors has decided to discontinue
going into the 2010 model year are its existing mild hybrids. The Chevy Malibu, and Saturn
Aura and Vue have been available with GM's belt-alternator-starter (BAS) system since 2007
but have never sold in any significant volumes. The system primarily provided automatic
start stop functionality with a little bit of electric boost and regeneration. The system
was limited by a weak motor and 36V battery system."
"We checked with GM's hybrid spokesman Brian Corbett about the status of the mild hybrids.
Corbett told ABG that currently there are no plans for retail sales of any of the mild
hybrid models."
Near the end of the article it makes mention of being able to produce 25 Kw (33 hp) for
brief periods. I wonder who will incorporate that extra power for a brief takeoff limit
(of maybe 60 secs??) Probably need one heck of a battery.
Greg in Canada
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.