Paul,
         Contacted jeff with details from your web page, but he does not supply the rubber mounts.  Where can I source them?
   Also is there just a chance that you have engine mounts that fit a glastar sportsman? Perhaps drawings??  If not I can manufacture them here.
     Neil Unger.

Check my web site again.
I just added the McMaster source for those rubber bushings.
Scroll down to just below Jeff's plate on the front page.


If you send me the dims on the firewall I can do a 3D
and the distance from firewall to prop flange
one using Jeff's plate.


Paul Lamar