Paul,
Have you done a drawing for a RV-10 Motor Mount before?  I just
returned from the EAA SportAir TIG Welding class in Griffin, GA this
weekend and have been doing a lot of practicing on my Lincoln Invertec
V205-T AC/DC tig welder in preparation for building a mount to couple
my 20B to the RV-10. I have Jeff's adapter plate and will be using
Tracy's RD1-C.

Don

Yes here is a 3 rotor version using the schertz beam.
I'll redo if for Jeff's motor plate shortly.

Paul Lamar



Thanks Paul !

Don Mitchell

Here is what it looks like.

-----------------------------------------------
Delete all of those old jpgs. Reset!

I have found a way to simplify the mount and remove
a few tubes of those tubes.

Here are the new 3D's.

Replace them with these.

-------------------------------------------
Here is what the cowling could look like.
There is tons of room in there for a large
rad.

Paul Lamar