This is going to be one great performer with
a 300 pound 250 HP P-port Mazda rotary turning
a six foot prop. Lots of room in the cowl for
the cooling system.

If anybody knows Bob Barrows email address please forward.
If not please print the pictures and mail them to him.

BTW Bob, check out our latest flyin.

http://www.youtube.com/profile?user=PaulLamar2#p/u/0/dibuqenWcOk

The dimensions shown are all you need if you have Jeff's plate
and a motor mount jig.

I am thinking of welding up a tower for sale that can be used
to hold Jeff's plate in position if you want to build
your own jig out of plywood. This could save you
some time. All you will need to do is set the tower
to the proper height and locate the fire wall hard points
on the plywood. When you are done with the tower
you can sell it to someone else. What does everybody think
about this idea?

Paul Lamar