Here are a few photos of the air scoop, which is still in progress. The
side shot shows the exhaust outlet and the inner part of the scoop.
There are some aluminum panel pieces which complete the outter part of
the scoop, they are not installed in this photo.

There is a shot or two from the rear showing the outlet of the heat
exchangers. On the left is the oil cooler, and the griffin radiator is
on the right. I intend to put a large cowl flap there, hinged at the
bottom and operated with a linear actuator.

Looking at the interior of the scoop from the front, you can see that I
have to do some streamlining to smooth the flow inside the scoop. I
don't think that will be too problematic.

Brian Trubee