thanks george g. very helpful info at my stage of knowledge. i downloaded
rhino trial, playing with it. if anyone is having good luck with alibre
chime in! does anyone else share the "laptop cad idea not so good"
philosophy?
James Whitehurst
I'm currently whizzing through the Alibre Design (standard) exercise book.
I'm doing the work on my Compaq CQ-50 laptop. No problems with display area
yet, the learning curve is a walk in the park.
Never used rhino, but this seems easier than Q-cad. I also bought a cheap
usb graphics tablet (digipro T8000U) with an 8x6 working area.
This is the way to go. I will probably upgrade to the full featured expert
edition eventually.
I have made 2 components of a 3-d multi part assembly since my last post.
C. Smith
Send us some renderings.
Paul Lamar
This is standard beginner kinds of parts. Real simple machines.
What format do you want to see?
My goal is to give you a 3-d of that top stabilizer base block you posted a
while back. If I can go from zero to that in say, a week. Would that qualify
as a quick learning curve?
Craig Smith
You mean this one?
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.