Here is the challenge.
Start with this data and do a 3D cowl
for an RV10 that looks like this  one using what
ever 3D program you have.

It must be rendered.
Assume a 12 inch spinner.
It must be to scale.

This is all the info you have to go on.
Assume max width is 41 inches.

I will be the judge and I will abstain
from doing one now.

You must submit a iges or stp file.

All the guys touting their favorite 3D program on here
so far must participate or they will be vilified and ridiculed :)
In other words put up or shut up :)

Paul Lamar


Paul, heres a quick kick at the cat..

Jarrett


I am going to change the rules here just a bit.
You must submit one of the three file extensions.
.iges .stp or .stl I prefer .stp.

These will be kept private. I will use them
to render top view, side view, front view and perspective for
purposes of judging each entry.

You must also submit at least one rendered jpg.

At the end of the week I will render and  publish 4 views on
each entry. I will not judge the winner. The readers will judge
the winner by voting after they see the renderings.
The judging criteria is how close the submissions look like
the stock RV10 cowl.

This will even the playing fields as the same rendering
program will be used for each entry. This is not a contest
of rendering programs.

Jeff is allowed to submit another entry due to the fact
I already rendered and published his entry and the rules
have changed.


Paul