Which rebuild kit should be used to assemble a 2nd gen 13b P Port?
Tracy"s
rebuild kit looks complete.  Am I missing something  peculiar to P Ports?
Thanks for any help.

Joe Berki
  Limo EZ

It might be complete but I don't trust the apex seals.

Apex seals are more subtle than they look.

Read this. http://www.rotaryeng.net/history.html
Or the whole section: http://www.rotaryeng.net/seals.html

If it were me I would buy the stock seals.
Or Iannetti ceramic.

I would also use Creavey Teflon silicone Orings.

http://www.rotaryeng.net/O-ring-size2.html
http://www.creavey.com/

Paul Lamar

I thought Tracy's rebuild kit used stock apex seals.
Joe Berki
  Limo EZ

There is no reason to believe that as he touts his own seals
on his web site. We tested a set and compression was down
10% right out of the box. After a few hours of running the
rotor housing was scored. Looking at them with a magnifying glass
showed a very bad surface finish.

Paul Lamar