Subject: Aircraft braking systems & staic thrust
From: Rotary Engine
Date: 3/2/2010, 7:04 PM
To: AAA Put this in the To box


  I suppose if you knew the mass of the air affected and the temp.
  increase you would know the HP.

Paul Lamar


IMHO.... that is the only way to do it

Robin

Suppose we added a bit of cheap instrumentation?

Paul Lamar

Work/time=power

And the tricky value to find is Work.
The old Force X Distance is not going to do it for us
because the forces are so dynamic.

In a more practical sense, using calculus
Work=Integral of f(x) dx
where f(x) defines how the force changes over distance x
But that is still too complex, because the force applied by the propeller on
the air varies radially, due to the varying pitch of propeller as well and
interference of engine/fuselage in the airstream

If velocity of prop wash could be measured everywhere, that is all we would
need. You have a box full of anemometers in your attic?  Oh yeah... a box of
thermometers too, because some of the energy is changed into heat

R


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.